Milano - FM - DIP SWITCH
Application usages
Description
Good lighting ensures a correct viewing of the environment and allows people to enjoy spaces at their fullest potential. With this in mind, the Milano recessed spotlight is ideal for quick and cost-effective installation in any exhibition environment to meet any interior design artificial lighting requirement.DIP switch adjustment: the luminaire is equipped with a built-in DIP switch driver for setting the output current; this will enable to choose the right light flux for each lighting design.The chance to choose the needed LED pilot current will allow you to have the right amount of power adjusted to any given design requirement. Choosing a lower current will increase the efficiency and improve energy savings, while a higher current will provide more light and make it possible to reduce the number of luminaires installed.
| Code | Wiring | Kg | Colour | I LED | TotW | K - Lumen Output - CRI – Degrees |
|---|---|---|---|---|---|---|
| 22081372-00 | CLD | 1.20 | white | 600 | 22 | 4000K - 2755lm - CRI>80 |
| 22081372-00 | CLD | 1.20 | white | 650 | 24 | 4000K - 2932lm - CRI>80 |
| 22081372-00 | CLD | 1.20 | white | 700 | 25 | 4000K - 3123lm - CRI>80 |
| 22081372-00 | CLD | 1.20 | white | 800 | 29 | 4000K - 3524lm - CRI>80 |
| 22081371-00 | CLD | 1.20 | white | 600 | 22 | 3000K - 2617lm - CRI>80 |
| 22081371-00 | CLD | 1.20 | white | 650 | 24 | 3000K - 2785lm - CRI>80 |
| 22081371-00 | CLD | 1.20 | white | 700 | 25 | 3000K - 2967lm - CRI>80 |
| 22081371-00 | CLD | 1.20 | white | 800 | 29 | 3000K - 3348lm - CRI>80 |
Versions
| Code | Kg | Nominal Current | Lumen Output - K - CRI | Beam angle | TotW |
|---|---|---|---|---|---|
| 0.9 kg | 600 mA | 2617 lm - 3000 K - >80 | 38 ° | 22 W | |
| 0.9 kg | 600 mA | 2755 lm - 4000 K - >80 | 38 ° | 22 W |
Accessories
| Name | Description | |
|---|---|---|
| EM Zestaw R |
Dimensions
| Luminaire height | 145 mm |
| Diameter | 200 mm |
The reported luminous flux is the flux emitted by the light source with a tolerance of ± 10% compared to the indicated value. The W tot column indicates the total wattage absorbed by the system without exceeding 10% of the indicated value.