Jet 250 - IP44 - DIP SWITCH
Installation type
Recessed
Application usages
Description
DIP switch adjustment: the luminaire is equipped with a built-in DIP switch driver for setting the output current; this will enable to choose the right light flux for each lighting design.The chance to choose the needed LED pilot current will allow you to have the right amount of power adjusted to any given design requirement. Choosing a lower current will increase the efficiency and improve energy savings, while a higher current will provide more light and make it possible to reduce the number of luminaires installed.
| Code | Wiring | Kg | Colour | I LED | TotW | K - Lumen Output - CRI – Degrees |
|---|---|---|---|---|---|---|
| 22065615-39 | CLD | 2.25 | white | 1400 | 52 | 3000K - 6285lm- CRI>80 |
| 22065615-39 | CLD | 2.25 | white | 1200 | 44 | 3000K - 5511lm- CRI>80 |
| 22065615-39 | CLD | 2.25 | white | 1050 | 38 | 3000K - 4922lm- CRI>80 |
| 22065615-00 | CLD | 2.25 | white | 1400 | 52 | 4000K - 6616lm- CRI>80 |
| 22065615-00 | CLD | 2.25 | white | 1200 | 44 | 4000K - 5181lm- CRI>80 |
| 22065615-00 | CLD | 2.25 | white | 1050 | 38 | 4000K - 5601lm- CRI>80 |
Versions
| Code | Kg | Nominal Current | Lumen Output - K - CRI | TotW | Colour |
|---|---|---|---|---|---|
| 1.8 kg | 1400 mA | 6616 lm - 4000 K - >80 | 52 W | White | |
| 1.844 kg | 1400 mA | 6285 lm - 3000 K - >80 | 52 W | White |
Accessories
| Name | Description | |
|---|---|---|
| EM Kit Q |
Dimensions
| Luminaire height | 110 mm |
| Diameter | 250 mm |
The reported luminous flux is the flux emitted by the light source with a tolerance of ± 10% compared to the indicated value. The W tot column indicates the total wattage absorbed by the system without exceeding 10% of the indicated value.