Strip - LED 24V - CRI<80
Installation type
Ceiling
Application usages
Description
LED strip to be applied on smooth, clean and dry surfaces with 3M adhesive.Avoid installation on sharp surfaces and any damage to components. The product is supplied in 4.8 metre reels, wound on special supports.The strips can be cut at predetermined intervals; in case of intermediate cuts, use the included caps and make sure to seal the cut ends carefully. Fosnova accepts no liability for cuts made after the material is delivered.LED strip: LED strip with constant voltage 24V. Ideal for many types of decorative lighting: accent lighting on facades, indirect emission on ceilings, insertion in mouldings or aluminium profiles. Features and advantages: - Luminous flux of 600, 1200, 1800 lm/m- Colour temperatures of 3000, 4000 and 6500 K- Cutting options in 10 cm steps for great design freedom- Light fixture spacing of 1.4 cm to ensure homogeneous brightness- 3M self-adhesive tape on the back side of the product for fast attachment to different surfaces- Circuit board connectors for quick and tool-free mounting- Life of 50. 000 hours- Solution in combination with constant voltage LED driver (fixed output voltage, dimmable)Power and Lumen are expressed per linear metre (W/m or lm/m).
Versions
| Code | Wiring name | Kg | Lumen Output - K - CRI | Beam angle | TotW | Colour | Length | Width |
|---|---|---|---|---|---|---|---|---|
| CLD-S+L | 0.1 kg | 600 lm - 3000 K - >80 | 120 ° | 5 W | 5000 mm | 8 mm | White | |
| CLD-S+L | 0.1 kg | 600 lm - 4000 K - >80 | 120 ° | 5 W | 5000 mm | 8 mm | White | |
| CLD-S+L | 0.1 kg | 1200 lm - 3000 K - >80 | 120 ° | 9 W | 5000 mm | 8 mm | White | |
| CLD-S+L | 0.1 kg | 1200 lm - 4000 K - >80 | 120 ° | 9 W | 5000 mm | 8 mm | White | |
| CLD-S+L | 0.1 kg | 1800 lm - 3000 K - >80 | 120 ° | 13 W | 5000 mm | 8 mm | White | |
| CLD-S+L | 0.1 kg | 1800 lm - 4000 K - >80 | 120 ° | 13 W | 5000 mm | 8 mm | White |
Accessories
Dimensions
| Luminaire length | 5000 mm |
| Luminaire Width | 8 mm |
| Luminaire height | 3 mm |
The reported luminous flux is the flux emitted by the light source with a tolerance of ± 10% compared to the indicated value. The W tot column indicates the total wattage absorbed by the system without exceeding 10% of the indicated value.