Milano - FL - DIP SWITCH
Typ instalace
Recessed
Použité aplikace
Popis
Good lighting ensures a correct viewing of the environment and allows people to enjoy spaces at their fullest potential. With this in mind, the Milano recessed spotlight is ideal for quick and cost-effective installation in any exhibition environment to meet all interior design artificial lighting requirements.DIP switch adjustment: the luminaire is equipped with a built-in DIP switch driver for setting the output current; this will enable to choose the right light flux for each lighting design.The chance to choose the needed LED pilot current will allow you to have the right amount of power adjusted to any given design requirement. Choosing a lower current will increase the efficiency and improve energy savings, while a higher current will provide more light and make it possible to reduce the number of luminaires installed.
Code | Wiring | Kg | Colour | I LED | TotW | K - Lumen Output - CRI – Degrees |
---|---|---|---|---|---|---|
22081364-00 | CLD | 1.20 | white | 600 | 22 | 4000K - 3129lm - CRI>80 |
22081364-00 | CLD | 1.20 | white | 650 | 24 | 4000K - 3329lm - CRI>80 |
22081364-00 | CLD | 1.20 | white | 700 | 25 | 4000K - 3545lm - CRI>80 |
22081364-00 | CLD | 1.20 | white | 800 | 29 | 4000K - 3989lm - CRI>80 |
22081363-00 | CLD | 1.20 | white | 600 | 22 | 3000K - 2972lm - CRI>80 |
22081363-00 | CLD | 1.20 | white | 650 | 24 | 3000K - 3163lm - CRI>80 |
22081363-00 | CLD | 1.20 | white | 700 | 25 | 3000K - 3368lm - CRI>80 |
22081363-00 | CLD | 1.20 | white | 800 | 29 | 3000K - 3790lm - CRI>80 |
Provedení
Kód | Kabeláž | Kg | Nominal Current | Lumen Output - K - CRI | Luminaire beam angle | WTot | Barva |
---|---|---|---|---|---|---|---|
CLD | 0.9 kg | 600 mA | 2972 lm - 3000 K - >80 | 74 ° | 22 W | White | |
CLD | 0.9 kg | 600 mA | 3129 lm - 4000 K - >80 | 74 ° | 22 W | White |
Příslušenství
Jméno | Popis | |
---|---|---|
EM Zestaw R |
Rozměry
Luminaire height | 145 mm |
Diameter | 200 mm |
Udávaný světelný tok je tok vyzařovaný světelným zdrojem s tolerancí ± 10 % oproti uvedené hodnotě. Sloupec W tot udává celkový příkon absorbovaný systémem, aniž by překročil 10 % uvedené hodnoty.